Your builder, fencer or joiner, or you. Everything arrives finished, in numbered sections, with fixings and a setting-out drawing showing exactly where each anchor goes, so fitting is straightforward.

How is the fencing supplied?

As panels and posts, ready to bolt or concrete in. Standard panels are up to 3 metres long, and we make the end and corner panels to your measured run so there is no cutting on site. Sloping ground is handled with stepped or raked panels. Tell us the fall across the run.

What height can I have?

Any height you like. Tell us the height and the length of the run, and we make the panels and posts to suit. Most garden fencing is 1.2 to 1.8 metres; front boundaries are usually lower.

Send us rough sizes with the enquiry and we will tell you exactly what to measure and where. For anything made to fit an opening we ask for three measurements across it, so it fits exactly. If you prefer, send photos and we will work from those to a budget price first.

Can I have a matching gate?

Yes. Matching gates are made at the same time from the same bar sizes and pattern, so the whole run looks like one job. Pedestrian and driveway gates are both available.

How long does it take?

Typically two to three weeks from the day you approve the drawings to the day it is delivered. Repeat orders on a design we already hold are faster. If you have a fixed site date, tell us at enquiry stage and we will confirm whether it can be met before you commit.

← All fencing & screens

Metal Fencing & Fence Panels

Estate fencing, steel fence panels and bow-top railings, made to your run.

Made to your measurements
Delivered ready to fit
UK-wide, 2–3 weeks

Get a price How it works

Not sure what to measure? Read the measuring guide

Metal fencing made to your run and levels, from decorative garden fencing to estate fencing across a boundary. Order it alongside gates and it arrives as one matched set: same section, same colour, same finish. Ordering them together is the simplest way to be sure they match.

What we supply

Steel fence panels, made to your bay size
Wrought iron style fencing for period properties
Estate fencing and parkland railings
Bow-top and vertical bar boundary railings
Posts, base plates and fixings supplied
Panels stepped or raked to follow sloping ground
Matching garden and driveway gates

Not on the list? If it is made of steel, describe it and we will price it. Ask for a price →

Specification

Panel size: Made to your bay, typically 1.8 to 2.5 m per panel
Common sections: 16 mm square bar infill, 40×40 SHS frame
Fixing: Bolt-down base plates or post-and-concrete
Finish: Hot-dip galvanised + powder coated as standard
Ground: Stepped or raked panels for sloping sites

To quote this, we need

Total run in linear metres
Required height
Whether the ground is level, sloping or stepped
Whether matching gates are needed

Missing some of it? Send what you have and we will tell you what else is needed.

Metal fencing & fence panels

Styles we make

Illustrations of popular styles. Yours is made to your drawing and sizes.

Before you enquire

Questions people ask about metal fencing

Who fits it?: Your builder, fencer or joiner, or you. Everything arrives finished, in numbered sections, with fixings and a setting-out drawing showing exactly where each anchor goes, so fitting is straightforward.
How is the fencing supplied?: As panels and posts, ready to bolt or concrete in. Standard panels are up to 3 metres long, and we make the end and corner panels to your measured run so there is no cutting on site. Sloping ground is handled with stepped or raked panels. Tell us the fall across the run.
What height can I have?: Any height you like. Tell us the height and the length of the run, and we make the panels and posts to suit. Most garden fencing is 1.2 to 1.8 metres; front boundaries are usually lower.
How do I measure up?: Send us rough sizes with the enquiry and we will tell you exactly what to measure and where. For anything made to fit an opening we ask for three measurements across it, so it fits exactly. If you prefer, send photos and we will work from those to a budget price first. Read the measuring guide →
Can I have a matching gate?: Yes. Matching gates are made at the same time from the same bar sizes and pattern, so the whole run looks like one job. Pedestrian and driveway gates are both available.
How long does it take?: Typically two to three weeks from the day you approve the drawings to the day it is delivered. Repeat orders on a design we already hold are faster. If you have a fixed site date, tell us at enquiry stage and we will confirm whether it can be met before you commit.

This page also covers

People come to us for metal fencing under a lot of different names. If you were searching for any of these, you are in the right place. It is all the same fabrication, priced the same way.

metal fence panels
steel fence panels
galvanised fencing
estate fencing
bow top railings
metal fence posts
fence panels made to measure

Get a price for metal fencing

Send your sizes, a drawing or a photo with dimensions on it, and we will come back with an exact price and a lead time. Everything is made to measure, to your sizes.

An exact price, usually within two working days: Material, fabrication, finish and delivery to your postcode are all included in it.
Rough information is fine: A phone photo with dimensions written on it is enough to start. We will tell you what else we need. See what to measure.
Prefer to talk?: Call +44 7481 454 999 (Mon–Fri, 08:00–17:00 UK time).
Quicker on your phone?: Send a photo on WhatsApp

More fencing & screens

Garden & privacy screens
Laser-cut pattern panels, corten screens and slatted privacy screens, free-standing or in a fence line.

See all fencing & screens →